Proudly serving the boating community since 1972

« Back to Search Print


Price: $89,000
Brand: C&C Yachts
Type: Sailboat
Year: 2015
Length: 30 ft.


2015 Model C&C 30 One Design

Designer Mark Mills

Builder US Watercraft



LOA 30.01 ft

DISP 3,850 lb

LWL 28.70 ft

BALLAST 1,865 lb

Ballast/Disp  49%

BEAM 9.84 ft  

RMC @20 8,818 ft/lb

AVS at MOC 142 degrees

AVS at LD 122 Degrees

DRAFT 7.50 ft


Rig & Sails:     

I: 41 ft Main Area 355 sf

ISP: 46.16

J: 11.32 ft Jib Area 255 sf

P: 41.8 ft Spin Area 1,297 sf 120.0 sm

E: 13.94 ft

STL: 18.7 ft

Upwind S/A 610 sf

DW S/A 1,480 sf

S/A Disp Upwind 33.6

S/A Disp Downwind 91

Disp/Length 70



ISO Category A

Hull Vinyl Ester / E-Glass / Foam Core Resin Infused

Deck Vinyl Ester / E-Glass / Foam Core Resin Infused

Carbon Reinforcing in Structural Grid

Keel: Fabricated Steel Fin / Lead T Bulb / Retracts for Transport, FRP Skins

Rudder: Carbon Fiber Stock / E-glass / Foam Blade / Roller Bearings

Keel & Rudder are Faired to Class One Design at the Shop

Measured & In Compliance With C&C 30 OD Class Upon Delivery



Inboard Diesel Engine with Sail Drive appx: 14 HP

Gori Two Blade Folding Geared Race Propeller

Fuel Tank appx 12 US Gallon (50 liter)

Fuel Filter & Water Separator

Waterlock Muffler



12 VDC Distribution Panel

Main Battery Switch

Battery 115 AH Deep Cycle

Alternator 80 Amp

ORC Approved LED Navigation Lights

LED Overhead Lights

Bonding System


Pumps & Plumbing:

Manual Bilge Pump Mounted Below

Second Manual Bilge Pump Mounted on Deck (Option)

Self Contained Head With Deck Pump Out

Seacocks on Openings Below DWL


Deck Gear & Winches:

Primaries: 2 Harken 35.2 PTP

Runners: 2 Harken 20.1 STA

Handles: 3 Harken

Custom Bow / Stern Pulpits with Running Lights

Stanchions: Tapered S/S with Braces

Lifelines: Dyneema Upper & Lower

Rope Clutches, “Constrictor” Textile Clutch

Jib Leads, Athwartship In/Out Up/Down Controls led aft to Trimmer

Backstay Tackles 2:1 to winches

Cunningham 5:1

Outhaul 8:1 at Mast

One Mainsail Reef

Mainsheet: 12:1 Coarse Tune/ Fine Tune

Traveler 5:1 to Main Trimmer

Vang, “Soft Vang’ Below Deck to Main Trimmer

Tackline led aft to Spinlock Clutch

Foredeck Hatch Offset 22” Dia Round

Offset Main Hatch

Access Ports Cockpit Sides for Lines

Composite Fiber Tiller with Tiller Extension


Rig & Rigging:

Hall Carbon Fiber Rig, keel stepped, adjustable with turnbuckle

Two Sets Swept Spreaders – Will Support Rig Without Backstays

Hall Carbon Boltrope Track for main Luff

Composite Sprit, Removable for Docking & Transport

Aluminum Boom with 8:1 Outhaul & Provision for 1 Reef

Two Dyneema Topmast Backstays

Wire Headstay

Shrouds: 1 X 19 S/S Wire

Complete Hall Running Rigging package:  Halyards, Sheets, & Control Lines

All Necessary Blocks, Cleats, Clutches



Soft Deck in Cockpit, Grey                                                                                                       

Black Powder Coated Stanchions & Rails                                                                                                                                           


Triad Trailer

Disc Brakes                                                                                               

Spare Tire & Mount

Hull Formed Bunks from USW                                                                


Race Electronics:

B&G Package

3 B&G Triton/H5000 10/10 Hv display pack 1 B&G H5000 graphic display H5000 CPU

Carbon mast instrument wand

Carbon Mast Bracket

Additional: Waterline Grand Prix Race Bottom

Grey Painted Hull

EnerPac 10,000 psi pump with jack


Box of various running rigging and lines

6 Musto 50N lifejackets

3 winch handles Tuff Luff with wire headstay

Bucket head (new)

Kinder Flat Fenders

Mesh Cockpit Line Bags

Lifeline Cushions


2016 North 3Di L1 Jib

2015 North 3Di Mainsail

2014 North 3Di Heavy Jib

2014 North 3Di Mainsail

2015 North 3Di Mainsail

2015 A2 Quantum Spinnaker

2015 A1 Quantum Spinnaker

Quantum J2-1 North light jib 3Di

11 battens

Contact your RCR Broker for more details

Tim Finkle - Sales & Marketing Manager

Youngstown, NY


Phone: 860-917-5416

Tim joined RCR Yachts in February 2014.  He grew up in Youngstown, learning to sail in the Youngstown YC Jr. Sailing program.  After leaving the area to attend Connecticut College and then work in New York City for 8 years, he decided to move home and follow his passion for boating.  He actively races his J/70 “Junior” all over the country and locally as a member of the Youngstown Yacht Club.  He is the co-chair of the CanAm Challenge that hosts a one-design regatta each July at YYC.  Tim is working in all areas of the business, but has focused mostly on Sales, Marketing and various company projects. He works out of the Youngstown and Buffalo offices and lives in Lewiston with his wife Aly and kids Cole & Louise.