Proudly serving the boating community since 1972





USWatercraft is proud to announce the newest addition to the Alerion Yachts line – the Alerion Sport 30. Alerion Yachts are renowned for their traditional beauty combined with modern design, and the Alerion Sport 30 is no exception. The same aesthetics and attention to detail now pair seamlessly with exciting new performance features and 21st century construction details.

The Alerion Sport 30 is the first Alerion offered with the option of a carbon-fiber bowsprit for the asymmetrical spinnaker. Combined with a full-roach mainsail and Hall carbon-fiber mast, the Alerion Sport 30 has the makings of a thoroughbred. Add in the lightweight, stiff construction, utilizing a carbon-reinforced structural grid and vinyl ester-infused hull with foam core, and you are guaranteed elegant performance on all points of sail, through the widest range of conditions. Working with the naval architects at Langan Design Partners, no detail was overlooked – from the recessed headsail furling unit to the carbon rudder post – when optimizing the design of this yacht.

The Alerion Sport 30 also includes everything you love about Alerion yachts. The maximized cockpit has seats long enough for a nap or seating for a full complement of friends. Creature comforts abound below where woodwork, detail, and finish are proof that the Alerion Sport 30 is a proper yacht. We’ve maximized headroom and interior volume to make it roomy enough for a weekend adventure. Sailing systems, from the self-tacking jib to efficient deck layout, are engineered for simplicity, allowing you to welcome aboard companions of every skill level and also singlehand with ease.

Like every Alerion, the Alerion Sport 30 is easy to set up and put away, allowing more time for sailing. With the Alerion Sport 30, we invite you to experience Alerion Sailing – sailing the way it should be.

Additional Information

Length Overall 30’ 1”
Length Water Line 24’ 5”
Beam 8’ 9”
Draft 5’ 0”
Air Draft 41’ 11”
Displacement 6,424 lbs
Ballast 2,650 lbs
Sail Area 465 sq. ft.
Sail Area/Disp 21.4
Aux. Engine 20 hp

Hull Shell
InfusionMolded (SCRIMP) GRP with biaxial and unidirectional E-glass reinforcing fabrics
Foam core
Vinyl ester resin gelcoat reinforcing layer
White gel coat hull color
Molded and tapered single gelcoat bootstripe – Owner’s choice of color

Hull Structure
Carbon-fiber reinforced structural grid
Keel floors, keel sump, engine bed, mast step and longitudinal stringers are integrally molded with the SCRIMP process

Vinylester resin infused with biaxial reinforcing fabrics and foam core
White deck with buff nonskid

Hull to Deck Joint
Flange type bonded with Plexus adhesive (ABS approved)
Full length teak toerail

Structural Bulkheads
Infused foam and E-glass bulkheads bonded to hull and deck with Plexus adhesive

Ballast Keel
Hybrid fin keel with low center of gravity
One-piece lead casting alloyed with antimony bolted to molded keel sump with 316 grade stainless steel bolts

Interior Joinery
Furniture is wood laminate with teak corner posts and teak fiddle rails
Varnished teak and holly cabin sole
The underside is sealed with epoxy
Tongue and groove beadboard overhead panel

Deck Hardware
Harken underdeck headsail furling unit
Spinlock rope clutches
Harken deck organizers
Harken cabintop stainless winches
Harken 6:1 mainsheet traveler track with cockpit control lines
Mainsheet 2:1 coarse and 6:1 fine tune
Self-tacking jib
(1) Lewmar deck hatch
(4) Stainless steel oval portlights
Teak handrails on cabin house top
(4) 8” Stainless mooring cleats
(2) 6” Stainless steel midship mooring cleats
Companionway sliding hatch with seahood and Lexan washboards
Molded starboard lazarette hatch
Large, molded forward anchor locker
Deck fill for fuel tank
Self-draining cockpit with port and starboard drains
Hall QuikVang solid vang
Garelick transom-mounted boarding ladder

Deck Hardware
Varnished tiller
Aluminum rudder shaft
Carbon-fiber reinforced rudder blade; high aspect ratio, balanced spade type
Low maintenance Jefa self-aligning bearings

Stainless steel headstay tang
Stainless steel main chainplates

Mast and Boom
Pre-preg carbon-fiber Hall Spars mast
Carbon-fiber gooseneck
Aluminum boom
Lazy jack sail retrieval system
G-10 Mast step
Steaming light
Masthead anchor light
“Moondust” Awlgrip finish on boom and mast
Swept-back aluminum spreaders

Standing Rigging
Dyform Wire rigging

Running Rigging
Tapered Spectra main halyard
Jib halyard
Mainsheet and fine tune run to molded Barney post
Jib sheets
Jib furler and outhaul lines
Single line reefing line
Mainsheet traveler lines

Forward Cabin
V berth with storage under berth
Deck hatch
Sunbrella-covered cushions for v berth
Overhead light
Molded head liner
Storage shelves port and starboard

Storage lockers outboard
Origo alcohol Stove
Corian countertops with molded sink

Main Cabin
Settees port and starboard
Shelves outboard of settees
Varnished teak and holly cabin sole with access to bilge
Electrical panel on starboard side settee

Head Compartment
White molded GRP pan
Marine head (portable)

Interior Décor
Removable overhead panels with teak trim
Molded bulkheads with teak trim
Molded shelves
Wood laminate doors
Varnished teak and holly cabin sole
Interior Sunbrella-covered cushions for settees, backrests, and V berth – choice of color

Electrical System
12v DC systemdesigned to ABYC
All wiring is tin-plated to inhibit corrosion
All wiring is coded for ease of identification
Bonding system
DC master panel with analog meter and magnetic circuit breakers
Battery switch
(2) 4D gel cell batteries
(2) LED reading lights
Overhead LED lighting in galley and head

Navigation Lights
Port and starboard LED lights mounted at stemhead
LED stern light mounted on aft deck
LED anchor light

20 HP Yanmar engine with sail drive
Two-blade folding propeller
Integrated GRP engine bed and oil pan
Through-transomwet exhaust
Single lever engine control
Neutral safety switch

18 US gallon fuel tank
16 US gallon PVC fresh water tank

(2) Harken winch handles
48” Teak ensign staff
Companionway and cockpit hatch locks
(2) deck plates keys
Owner’s manual
Equipment manuals (Owner’s manuals for builder-installed equipment, pumps, winches, etc.)
Bilge pump handle
Running rigging blocks
Retractable re-boarding ladder in transom